EAE StompMix X6 Rechargeable Pedalboard Mixer with LFP Battery and Bluetooth

EAE StompMix X6 Rechargeable Pedalboard Mixer with LFP Battery and Bluetooth

Compact Digital Mixer Pedal with Lithium Battery

StompMIX X6 - 6 Channels Battery Powered Digital Pedalboard Mixer with Bluetooth

The StompMix X6 compact digital pedalboard mixer packed a 32-bit DSP engine to a lightweight and compact stomp box package.  The X6 offers a full featured, highly intuitive 6 channels Digital Mixer with a Color Display.  The powerful DSP engine provides a compressor, limiter, Mid sweepable EQ, Highpass Filter, Notch Filter, Phase reverse to each of the 4 Mic inputs.  The X6 features Reverb/Chorus effects processors with dedicated mix bus, an assignable Delay effects processor, and 4 Class A solid-state Mic pre-amps with +48V Phantom power.  You will also have the ability to stream and/or mix your Bluetooth inputs from your MP3 player or Phone for backtracking and in between sets music. We added 2 Footswitches allowing instant access to stored scenes for easy and fast setup.  The X6 compact digital pedalboard mixer is powered by a rechargeable 3300mAh Lithium Iron Phosphate (LifePO4) battery for portability, convienence and freedom to be off grid, going to where no Digital Mixer has go on before!

The StompMix X6 compact digital pedalboard mixer is equipped with a user removable battery module. It allow user to swap the battery module with removing the battery cover on the bottom panel, A quick connected and none reversible type of connector are used to prevent error in wiring the battery.  Whether if you needed to swap batteries (extra battery modules are sold separately) during the gig or replacement, it will take minutes to complete the task.  We choose Lithium Iron Phosphate (LifePO 4) type of batteries for it’s advantages in safety properties. LifePO4 is thermally and chemically stable, reliable without the possibility of lithium fires. LifePO4 batteries have shelf life that far exceeds the service life of many other batteries. The StompMix X6  batteries are UL safety approved and MSDS Certified.

Some Screen Shots from the X6 (D6-8) DSP engine. We may update our firmware to add functions as we get feedback from our customers.

StompMix X6 Features

  • 6-Channel Compact Digital Mixer Pedal
  • 2 High Z (1M OHM), 4 Mic and 6 Line inputs
  • +48V Phantom Power
  • Independent Effects on each channel
  • Noise Gate, Compressor, EQ, Reverb,
    Chorus, Delay, & more
  • Main MIX (XLR) output EQ
  • Main Mix headphone outputs (1/8″ jack)
  • Bluetooth & Auxiliary Input
  • MAIN and AUX output level controls,
  • Main MIX and AUX MIX Outputs
  • Main MIX (MUTE) – via Footswitch
  • Scenes Change  – via Footswitches.
  • Metal chassis
  • Panel-mounted POTs/Jacks
  • AC supply/ Battery Charger
  • Built-in Rechargeable Lithium Battery
  • Up to 4-6 hours of play time
  • Fast Charging time.
  • Designed and assembled in USA

Check out this video from Singer Songwriter Don Alder on how to use the StompMix X6 for Multiple Pickups.

Scenes Change via MIDI

  • Scenes 1-10 can be instantly recalled upon receipt of MIDI program changes messages (program 0-9). Bank change messages are not supported.

Save and Load Scenes

How to save and recall/Load Scenes.
a. Save –
> 1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower right encoder “save” clockwise a few times, the arrow above the “save” should move.This should save current settings in memory “9”.  Save Several Scenes setting with different memory locations before using recall to check.

b. Load –

1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower middle encoder “Load” clockwise a few times, the arrow above the “Load” should move. This should load what is in memory “9” into current settings.

A and B Footswitches can also be used for loading and changing the scenes.

Press the “main” button and double check,

Battery Protection Circuit and LifePO4 battery Safety

We selected Lithium Iron Phosphate (LifePO 4) type of batteries for it’s advantages in safety properties and Long service life. LifePO4 is thermally and chemically stable, reliable without the possibility of lithium fires. LifePO4 batteries have long service life, with a shelf life that far exceeds the service life of many other batteries. For more protection again mishaps, we added many Battery Protection circuits – Over Voltage protection, Thermal Shutdown, Over Charge protection, Over Drain protection. The LifePO4 batteries used in our products are UL safety approved and MSDS certified. More details on LifePO4 battery can be found on this linkLifePO4 battery.