D6-8 PRO Acoustic Guitar Amplifier

D6-8 PRO Acoustic Guitar Amplifier

D6-8 PRO Acoustic Amplifier

Enclosed in a wood finishing cabinet and incorporating the same DSP engine as the D6-8 Battery Powered Acoustic Amplifier, the D6-8 PRO acoustic Guitar amplifier offers a full featured programmable Digital Mixer with Effects and Color Display.  Porting the same highly intuitive UI with extensive dedicated parameter control as the time D6-8 Amplifier and the StompMix X6.  The 6 channels digital mixer comes with compressor, gate, mid sweepable EQ, high Pass Filter, Notch Filter, Phase reverse for each of the 4 Class-A solid-state Mic pre-amps.  The D6-8 PRO acoustic Guitar amplifier allow user to stores and manages parameter settings for instant access to that perfect mix via scene changes. Backtracking or simply playing music in between sets, Bluetooth streaming make it easily done.  Main mix (selectable as Direct Out) with GND lift and Aux Mix outputs allow your mix (with EQ setting) to sending to house PA or other speakers.  Designed and built with Active crossover and individual amplifiers for the  8″ woofer and 1″ silkdome Tweeters resulting in pleasing sonic response for the full audio spectrum. Main mix (selectable as Direct outs), Monitor Right output and Aux Mix outputs offer extreme flexibilities to send to House PA or additional speakers.  Whether if you are looking for a practice amp, a stage amp for small to medium size venues, a stage monitor for larger venues,  the D6-8 PRO can meet all those needs.

Click on Image to zoom in.

Click on Image to zoom in.

Click on Image to zoom in.

Click on Image to zoom in.

For more Product Details – Click here.

Click here to BUY.

Short Introduction Video for D6-8 PRO.

For more Product Details – Click here.

D6-8 PRO Acoustic Guitar Amplifier

  • 80 Watt total Bi-Amp
  • 6-Chan Full Function Digital Mixer & Effects
  • 2 High Z (1M ohm), 4 Mic and 6 Line inputs
  • +48V Phantom Power for all 4 MIC inputs.
  • Independent Effects on each channel
  • Noise Gate, Compressor, EQ, Reverb, Chorus, & more
  • Max 4 seconds of Delay can be used as insert into one channel at a time.
  • Bluetooth
  • High-efficiency Class D amplifier with Active crossover
  • 8″ woofer & 1” inch tweeters
  •  Monitor section; 3-band EQ, Monitor Volume,
    stereo AUX input with level control
  • Chan 1/2 Direct Out
  • Main-Mix Left/Right Output with GND lift
  • Solid MDF or Plywood Cabinet
  • Metal chassis
  • Panel-mounted POTs/Jacks
  • IEC power inlet – 100VAC-250VAC
  • Standard 35mm built-in pole mount
  • Designed and assembled in USA
  • 18LBs
  • 12.13″w x 11.13″ H x 10.55″ D